Metering Equipment on Crocker Co., Inc., The

Call Us Today: 513.563.6053 | Fax: 513.563.0329 | E-mail: info@crockercompany.com

Home About Us Products Contact Us Site Map

Products Air & Gas Blowers Metering Equipment Oil Filtration &Purification Vacuum Equipment & Systems Kytola Oil Flowmeters


All Categories > Metering Equipment


	Metering Equipment
	Click on a Product to view details.


		Roots® Micro Corrector (3) This second generation Micro Corrector has the enhancements customers have been asking for. Using the proven IMC/W platform, features were added that make it the easiest corrector to use. Functions were added that improve low flow measurement, enhance data logging, and lower operations and maintenance costs while retaining the great features introduced in the original IMC/W. The ROOTS Micro Corrector, model IMC/W2, functions as a compact integral component of the rotary meter, rather than being an adaptation of a product that cannot take full advantage of the integration of meter and corrector. It’s the only integral corrector rated for Division 1 hazardous locations.




		Roots® Series B3 Line Mount Meters (22) Series B3 meters are designed to provide accurate gas measurement over widely fluctuating flow, pressure, and temperature conditions. For further versatility, the five smallest meter sizes (8C through 3M) have 2" (50 mm) flanged connections, and a 6 3/4" (171 mm) flange-to-flange dimension. If application requirements change, this unique, cost-effective feature allows a quick and easy meter exchange without the need to re-pipe the meter set. Other key features include: Capacity ratings from 800 CFH to 56,000 CFH (22,6 m³/h to 1,585 m³/h) Maximum operating pressure rating of 175 PSIG (12 Bar) Models 8C through 5M are available with a 200 PSIG (13,8 Bar) rating upon request Operating temperature range from -40ºF to +140ºF ...




		Roots® Expanded Meter Line (4)




		Roots® Series 3 Accessory Units (4) Designed for low maintenance and a long service life Interchangeability among Series B meter bodies of the same size Permanently lubricated for long life and virtually maintenance-free operation Modular design allows a quick-change to a different version at a lower overall cost Durable, weather resistant cover with improved sealing capability Versatile and configurable odometer masking Universal Instrument Drive (ID) assembly - one size fits all 8C-56M Series B Meters Quick and easy field installation of the low cost Solid State Pulser Available with factory pre-installed magnets for quick installation of the Solid State Pulser or Model 5 Prover Field Counter Pulser Module




		Roots® Optional Electronic Products (2)




		Roots® Electronic Instrumentation (3)




		Roots® High Pressure Meters (2) Series B3-HPC (High Pressure Cartridge) Meters This meter line features a common cast-steel housing for the 1M (1000 ACFH) and 3M (3000 ACFH) sizes as well as the 5M 1480 (5000 ACFH) and 7M 1480 (7000 ACFH) sizes of aluminum cartridges. The meters are available with either an ANSI Class 300# flange for the 740 PSIG Meter lines or an ANSI Class 600# flange for the 1480 PSIG Meter lines. The 5M(5000 ACFH) and 7M (7,000 ACFH) meters are designed for higher capacity applications with a maximum allowable operating pressure of 1480 PSIG. The housing is cast steel to meet the demands of the higher flow rates and pressures. The cartridges are field replaceable and are interchangeable between housings regardless of the pressure ...




		Roots® Meter Sets & Piping Specialty Accessories (4) A full line of meter set components are available for a one-stop-shopping approach to meter set design and installation. Reduce your installation cost with a professionally designed and tested Roots® meter set.




		Model 5 Roots® Provers (4) Model 5 Transfer Provers feature an integrated computer controlled system for verification and testing of rotary, diaphragm, and turbine gas meters. After the field meter is connected to the Prover and the test sequence is selected, the remainder of the operation is "hands-off". Test sequencing is automatically controlled by the software settings and the test results are displayed on the computer screen. For ease of testing and recording, the Model 5 Prover system will: Store unlimited predetermined field meter test configurations Perform and display all calculations at the end of each test and allow for saving to disk Provide user-friendly menu prompts Allow easy access to extensive Help Files The primary ...




		Roots® Provers & Accessories (6)




		Roots® Test Equipment (5)




		Roots® Accessories (6)




		Product Repair Services Our Product Services Department offers repair, remanufacturing, testing and calibration service for all ROOTS® meters, provers, and instrumentation. At Roots Meters & Instruments, our focus is on customer satisfaction. Let the experts handle your ROOTS® products repair and calibration needs. The overall cost effectiveness of factory service is enhanced by: Standardized and competitive service levels Specialization in contract services Inspection for warranty and upgrades Line Mount Meters returned freight prepaid to the first point of delivery within the United States




		Roots® AMR Adapters Dresser’s new residential AMR Adapter for the Series 3 Roots CTR/TC and the Series A (LMMA) CTR/TC accessory units allows you to mount an Itron® Residential ERT® 40G for Invensys or American Meters directly onto a Dresser Roots Series B3 or Series A Rotary Meter. Additionally, there is an Adapter to mount an American footprint Cellnet Module directly to the end of a Roots® Rotary Meter. The design utilizes a Series B3 or Series A Lexan® cover with an opening to engage the ERT or Cellnet module in a direct drive link to the gear reduction unit. Our proven ID seal system between the adapter and the Series 3 cover provides a barrier against moisture intrusion into the oil free cover. The AMR Adapter is fastened to the ...

Site created by ThomasNet Interactive, a division of ThomasNet.com